Hammerite High Heat Paint Black 0.4 L
From £12.23
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Hammerite High Heat Paint . Finish type: Matt, Colour name: Black, Composition: Solvent-based. Drying time: 0.5 h, Recoat after: 0.25 h, Heat-resistant up to: 600 °C. Paint volume: 0.4 L, Package width: 64 mm, Package depth: 64 mm. Quantity per pack: 1 pc(s). Master (outer) case width: 200 mm, Master (outer) case length: 136 mm, Master (outer) case height: 200 mm
Product
Features
Suitable for indoor use
No
Suitable for outdoor use
Yes
Finish type
Matt
Colour name
Black
Composition
Solvent-based
Best uses
Furniture
Suitable for materials
Metal
Coverage per pack
1 m²
Number of coats (min)
3
Number of coats (max)
4
Volatile organic compounds (VOC) content labelling system
Very high (>50%)
Dispenser type
Spray
Surface preparation
Ensure surface is cool before and during preparation. Lightly abrade the surface to remove loose paint and rust. Remove dirt and grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow to dry
How to use
Switch off all ignition sources. Ensure surface is cool before and during spraying. Ideal application temperature range is 8-25°C. Mask off the surrounding area to protect from overspray. To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use. Prior to use shake the can vigorously until the agitator ball is heard and then for a further 3 minutes.To avoid runs and sags spray in light even strokes from a distance of about 15cm. Spray a light covering-coat. When touch dry (about 30 minutes) apply a further 2-3 coats, allowing 15 minutes between each coat. After application leave the painted surface to dry overnight. Turn aerosol upside down and spray for 2 seconds in between coats and after final use.
HSE note
Flame, Exclamation mark Danger Contains Acetone. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F. Dispose of contents and container in accordance with all local, regional, national or international regulations. Repeated exposure may cause skin dryness or cracking.
Performance
Drying time
0.5 h
Recoat after
0.25 h
Heat-resistant up to
600 °C
Packaging content
Quantity per pack
1 pc(s)
Weight & dimensions
Paint volume
0.4 L
Package width
64 mm
Package depth
64 mm
Package height
199 mm
Package weight
450 g
Logistics data
Master (outer) case width
200 mm
Master (outer) case length
136 mm
Master (outer) case height
200 mm
Products per master (outer) case
6 pc(s)
Layers per pallet
4 pc(s)
Products per pallet layer
222 pc(s)
Products per pallet
888 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
