Hammerite Radiator Enamel Satin Aerosol 0.4 L
From £8.35
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Hammerite Radiator Enamel Satin Aerosol . Product type: Paint, Best uses: Metal, Finish type: Satin. Package width: 64 mm, Package depth: 64 mm, Package height: 199 mm. Quantity per pack: 1 pc(s). Suitable for materials: Metal. Master (outer) case width: 200 mm, Master (outer) case length: 136 mm, Master (outer) case height: 200 mm
Product
Features
Product type
Paint
Suitable for outdoor use
No
Suitable for indoor use
Yes
Best uses
Metal
Finish type
Satin
Paint volume
0.4 L
Colour name
White
Suitable location
Bathroom, Bedroom, Children's room, Dining room, Hallway, Home office, Kitchen, Living room
Surface coverage
0.5 m²/L
Composition
Solvent-based
Volatile organic compounds (VOC) content
499 g/l
Volatile organic compounds (VOC) content labelling system
High (25 - 50%)
Minimum drying time
1 h
Maximum drying time
2 h
Recoat after
0.25 h
Number of coats (min)
3
Number of coats (max)
4
Dispenser type
Spray
Surface preparation
All surfaces must be clean, dry and free from rust, flaking paint, dirt, dust and grease. Rub down all painted surfaces with abrasive paper. Radiators must be turned off and only painted when cold. Mask off the surrounding area to protect from overspray
How to use
Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving. Do not concentrate spray on one spot. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray as sagging may occur if excessive paint is applied. Between coats invert can and spray for 2 seconds to avoid blockages.
HSE note
Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol.
Pressurized container: may burst if heated.
Causes serious eye irritation.
May cause drowsiness or dizziness.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains phthalic anhydride and 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
Packaging content
Quantity per pack
1 pc(s)
Packaging data
Package width
64 mm
Package depth
64 mm
Package height
199 mm
Package weight
400 g
Logistics data
Master (outer) case width
200 mm
Master (outer) case length
136 mm
Master (outer) case height
200 mm
Products per master (outer) case
6 pc(s)
Layers per pallet
4 pc(s)
Products per pallet layer
222 pc(s)
Products per pallet
888 pc(s)
Other features
Suitable for materials
Metal
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
