Hammerite No 1 Rust Beater Aerosol 0.4 L
From £9.50
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Hammerite No 1 Rust Beater Aerosol . Best uses: Furniture, Product form: Ready mixed, Suitable for materials: Metal. Primer volume: 0.4 L. Package width: 64 mm, Package depth: 64 mm, Package height: 199 mm. Quantity per pack: 1 pc(s). Master (outer) case width: 200 mm, Master (outer) case length: 136 mm, Master (outer) case height: 200 mm
Product
Features
Suitable for indoor use
Yes
Suitable for outdoor use
Yes
Best uses
Furniture
Product form
Ready mixed
Suitable for materials
Metal
Colour name
Basic Beige
Composition
Solvent-based
Finish type
Matt
Dispenser type
Spray
Coverage per pack
0.5 m²
Volatile organic compounds (VOC) content
350 g/l
Volatile organic compounds (VOC) content labelling system
High (25 - 50%)
Drying time
0.5 h
Recoat after
0.5 h
Number of coats (min)
3
Number of coats (max)
4
Surface preparation
Remove loose rust, scale and paint by wire brushing or rubbing down with coarse abrasive paper. Abrade clean steel with emery paper to provide a key. Degrease where necessary with white spirit, rinse with clean water and allow time to dry
How to use
Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes.Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes.When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats.
Do not overspray or sagging might occur.A topcoat may be applied after a minimum of 4 hours. For best results allow 24 hours.
Between coats invert can and spray for 2 seconds to avoid blockages.
Tool cleaning
Between coats invert can and spray for 2 seconds to avoid blockages
HSE note
Flame, Exclamation mark Danger Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS,less than 5% N-HEXANEExtremely flammable aerosol.
Pressurized container: may burst if heated.
Causes skin irritation.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 2-butanone oxime. May produce an allergic reaction.
Weight & dimensions
Primer volume
0.4 L
Packaging data
Package width
64 mm
Package depth
64 mm
Package height
199 mm
Package weight
420 g
Packaging content
Quantity per pack
1 pc(s)
Logistics data
Master (outer) case width
200 mm
Master (outer) case length
136 mm
Master (outer) case height
200 mm
Products per master (outer) case
6 pc(s)
Layers per pallet
4 pc(s)
Products per pallet layer
222 pc(s)
Products per pallet
888 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
