Megasat HD 7 Combo 950 - 2150 MHz Built-in display Audible alarm(s) Digital 1 pc(s)

Measurement of all reception signals (satellite, cable, terrestrial, DAB+) on an 8.9 inch touch screen display. Spectrum and constellation diagram for error analysis. Automatic satellite detection (NIT). Integrated receiver with live TV playback. LED light on the back panel. DiSEqC monitor for reading out the switching commands of devices.

With the Satmeter HD 7 Combo TV and radio signals can be measured. It offers an exact measurement for satellite, cable / terrestrial television (incl. DVB-T2 HD). With the DAB/DAB+ measurement, digital radio measurements can also be performed. The complete housing is made of robust and high-quality aluminum, in which a 8.9-inch touch screen color display was integrated. As a small highlight, an LED light is mounted on the back of the housing, so that the system can be measured even in low light conditions. Operation is child's play with the clear and well-structured menu. All measurement functions are easy to reach and almost self-explanatory.

Large signal level display and live TV playback
To align a dish , first orient yourself to the signal level and signal quality. You can switch these to a large display by pressing the magnifying glass symbol to make optimum use of the display.

To check the TV picture live afterwards, the measuring device offers an integrated receiver. It is possible to play back all free-to-air digital channels in SD, HD and UHD. Furthermore, a channel list with the most popular channels is pre-installed, which you can also individually adapt to your needs. If channels or frequencies change, you can search for them via the menu.

spectrum and constellation analysis
To evaluate the signal of the satellite system and to analyze possible reception errors, use the spectrum analysis. They find errors faster and can quickly adjust the satellite system for the best possible reception.
The constellation analysis provides a further view of the satellite reception to evaluate the signal and eliminate sources of error. You can see immediately whether the signal is arriving in a bundled or scattered form. Furthermore, additional measurement data such as dBm, CNR, BER can be shown on the display.

Angle calculation, compass and satellite detection for quick alignment
The integrated compass and angle calculation helps you to determine the vertical and horizontal angle of the antenna, because the elevation and azimuth change depending on the location. Simply enter the data of the location and the meter quickly calculates the appropriate angle settings for the dish. This makes it easier to find the desired satellite.

With the automatic satellite recognition (NIT) you will be immediately informed on which satellite you are located. This makes alignment attempts lasting several minutes a thing of the past.

Power battery and many accessories
The integrated power battery provides up to 4 hours of operation. It can be charged with a standard 230V power supply or with the included car charger adapter while travelling in the car. The enclosed protective cover with carrying strap protects the measuring instrument from dirt and splash water. Save the measured data to a USB stick for later analysis. The program list can also be exported and future firmware updates installed via USB.