Question 1

What is the difference between a wireless access point and a wireless router?

Accepted Answer

A wireless access point extends an existing wired network by adding Wi-Fi connectivity, whilst a wireless router combines routing, switching, and Wi-Fi in a single device. APs are designed to be deployed in multiples across a site, all connected back to a central switch or router — they don't handle DHCP or NAT themselves. If you're setting up a multi-room or multi-floor network, dedicated APs managed centrally will always outperform a cluster of routers trying to work together.

Question 2

Do I need a PoE switch to use most access points?

Accepted Answer

Yes, the vast majority of access points in this catalogue are PoE-powered and have no mains power socket. You'll need either a PoE switch or a standalone PoE injector for each AP. Check the PoE standard required — PoE (802.3af, 15.4W), PoE+ (802.3at, 30W), or PoE++ (802.3bt, 60W+) — as mismatching can result in the AP running in a reduced-power mode or not powering on at all. Budget for your switch infrastructure alongside the APs themselves.

Question 3

Is Wi-Fi 6 worth the extra cost over Wi-Fi 5 for a small office?

Accepted Answer

For a new installation, yes — the price gap between Wi-Fi 5 and Wi-Fi 6 APs has narrowed considerably, and the efficiency improvements in dense environments are real. Wi-Fi 6's OFDMA technology handles multiple simultaneous device requests more gracefully, which matters even in a 10-person office where everyone has a laptop, phone, and perhaps a smart display. If you're replacing a single ageing AP and budget is tight, a Wi-Fi 5 unit is still perfectly functional — but for a fresh deployment, Wi-Fi 6 is the sensible long-term investment.

Question 4

Which brands offer the best value for a small business deployment?

Accepted Answer

TP-Link Omada and Ubiquiti UniFi offer the strongest combination of performance, features, and price for SMB deployments. TP-Link's Omada ecosystem is particularly accessible — cloud management is free, hardware is affordable, and the range covers everything from wall-plate units to outdoor APs. Ubiquiti UniFi requires slightly more technical confidence but gives you more control and scales well. D-Link Nuclias is a solid alternative if you prefer a more traditional vendor with UK support channels.

Question 5

What traps should I avoid when buying a cheap access point?

Accepted Answer

The biggest trap is buying a standalone AP when you actually need centralised management — you'll end up manually logging into each unit for every firmware update or configuration change. A second common mistake is ignoring the PoE power budget: a cheap AP that requires PoE+ connected to a switch that only delivers standard PoE will underperform or fail entirely. Finally, watch out for units with no clear upgrade path or discontinued management software — some budget brands abandon their cloud platforms, leaving hardware stranded. Stick to brands with active ecosystems: TP-Link, Ubiquiti, D-Link, and NETGEAR all have strong ongoing support in the UK market.

Question 6

Can I use an indoor access point outdoors if I put it in a weatherproof enclosure?

Accepted Answer

We strongly advise against it. Indoor APs are not designed for the thermal cycling, condensation, and humidity that outdoor environments produce — even inside an enclosure. Condensation forms inside sealed boxes as temperatures fluctuate, and without active thermal management, components degrade rapidly. Proper outdoor APs (IP65 or IP67 rated) are engineered for these conditions from the ground up, with sealed connectors, UV-resistant housings, and operating temperature ranges down to -10°C or lower. The cost saving isn't worth the reliability risk.

Question 7

How many access points do I need to cover a typical UK office floor?

Accepted Answer

As a rule of thumb, plan for one AP per 200–300 m² in a standard UK office with plasterboard partitions, or one per 100–150 m² in older buildings with solid brick or concrete walls. An open-plan floor of 500 m² in a modern office building typically needs two to three ceiling-mounted APs for reliable coverage. More importantly, prioritise AP density over AP power — overlapping coverage from multiple units with band steering and load balancing will always outperform a single powerful AP trying to cover the same area.

Wireless Access Points Price Comparison

ASUS EBA63 ExpertWiFi AX3000 Dual-band PoE 2402 Mbit/s White Power over Ethernet (PoE)

TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point

Ubiquiti U7 Pro 5400 Mbit/s White

Zyxel NWA130BE-EU0101F wireless access point 5764 Mbit/s White Power over Ethernet (PoE)

Ubiquiti U7 Pro Wall 5700 Mbit/s White Power over Ethernet (PoE)

DrayTek VigorAP 1062C Wi-Fi 6 AX6000 Ceiling AP with 2.5Gb PoE Ethernet

Ubiquiti U7 Lite 4300 Mbit/s White Power over Ethernet (PoE)

TP-Link EAP650-DESKTOP wireless access point White Power over Ethernet (PoE)

Wireless Access Points Price Comparison