Question 1

How do I find the VESA pattern for my TV?

Accepted Answer

Check the back of your TV for four threaded holes arranged in a rectangle — measure the horizontal and vertical distance between them in millimetres. That's your VESA pattern (e.g. 400×200mm or 400×400mm). If you can't measure directly, the figure is listed in your TV's manual or on the manufacturer's product page under 'dimensions' or 'mounting specifications'. Getting this wrong is the single most common reason for returns in this category.

Question 2

Can I mount a TV on a plasterboard wall without hitting a stud?

Accepted Answer

Yes, but only with the correct cavity anchors and a mount rated for the load — it's not something to improvise. Specialist toggle bolts and cavity wall anchors (such as Molly bolts) can support significant weight in plasterboard when installed correctly, but you must verify the anchor's load rating matches or exceeds your TV's weight. For screens above 40kg or larger than 65", locating the timber studs behind the board is strongly preferable. When in doubt, a professional installer will assess the wall and fit the appropriate fixings.

Question 3

What's the difference between a tilting and a full-motion mount — is the extra cost worth it?

Accepted Answer

A tilting mount adjusts the vertical angle only (typically ±10–15°), which is enough to correct for a TV mounted above eye level. A full-motion articulating arm adds horizontal swivel (pan) and sometimes rotation, letting you pull the screen away from the wall and angle it towards different seating positions. The extra cost is worth it if your room has multiple viewing spots or an open-plan layout. For a dedicated home cinema or bedroom where you always sit in the same place, a tilting mount — or even a fixed mount — is the smarter, more stable choice.

Question 4

Are cheap TV mounts actually safe to use?

Accepted Answer

The very cheapest brackets — under 35 £ — are generally safe for smaller screens (up to 42") when installed correctly, but the margin for error is smaller. Thin-gauge steel, imprecise tilt mechanisms and minimal cable management are the typical compromises. The real risk isn't the bracket itself but incorrect installation: wrong wall anchors, ignoring the weight limit, or mismatched VESA patterns. A 35 £ mount installed properly is safer than a premium mount fitted carelessly. Always check the weight rating against your TV's actual weight before buying.

Question 5

Do TV floor stands work on carpet?

Accepted Answer

Most floor stands are designed for hard floors and can be unstable on thick carpet because the base doesn't sit level. Some models include adjustable feet or wider bases that compensate, but it's worth checking the product specifications. One For All's tripod stands, for instance, have rubber-tipped feet that grip reasonably well on low-pile carpet. On deep-pile carpet, consider placing a rigid board under the base for stability — particularly important for screens above 55".

Question 6

What size TV mount do I need for a 65-inch TV in 2026?

Accepted Answer

For a 65" TV, look for a mount rated for screens up to at least 65" (some list 75" for extra headroom) with a weight capacity of at least 35–40kg. The most common VESA patterns on 65" sets are 400×400mm and 600×400mm — verify yours before ordering. Budget around 60 £ to 124 £ for a quality tilting or full-motion mount at this screen size; going cheaper risks a bracket that flexes under the weight of a large OLED panel.

Question 7

Which TV mount brands should I avoid?

Accepted Answer

We'd be cautious about unbranded or unknown-brand mounts sold at very low prices on marketplace platforms, particularly those without a clearly stated weight rating or VESA compatibility list. The risk isn't just poor build quality — it's the absence of any accountability if the mount fails. Sticking to recognised names (One For All, Neomounts, SANUS, Hama, B-Tech) gives you a paper trail for warranty claims and access to UK customer support. That said, even budget-branded mounts from established retailers like Argos or Currys carry some consumer protection under UK law.

TV Mounts & Stands Price Comparison

Proper Swing Arm TV Wall Bracket for 19''-28' 71.1 cm (28") Black

Proper Tilting TV Bracket for Flat and Curved 32''-55'' 139.7 cm (55") Black

Proper Flat Wall TV Bracket for Curved and Flat 32''-55'' 139.7 cm (55") Black

Chief MSM1U TV mount/stand 119.4 cm (47") Black

B-Tech XL Universal Flat Screen Wall Mount (VESA 900 x 600)

Chief XSM1U TV mount/stand 2.08 m (82") Black

Chief LTM1U TV mount/stand 165.1 cm (65") Black

B-Tech Ultra-Slim Universal Flat Screen Wall Mount (VESA 200)

VALUE Solid Articulating Wall Mount TV Holder

Neomounts LFD-W1000 TV mount wall 60-100" - fixed

Peerless PA762 TV mount/stand 2.29 m (90") Black

Chief MTMP1U TV mount/stand 119.4 cm (47") Black

One For All WM 4661 TV mount/stand 2.13 m (84") Black

One For All WM2241 101.6 cm (40") Black

Techly Wall Support for LCD LED 13-30" Tilting 2 Joints Black ICA-LCD 923B

One For All SMART 68.6 cm (27") Black

Chief MSA1U TV mount/stand 139.7 cm (55") Black

Peerless SUA771PU TV mount/stand 2.29 m (90") Black

B-Tech Flat Screen Ceiling / Desk Mount with Tilt & Swivel (VESA 100) - 1m Ø50mm Pole

Techly Wall Mount for LED LCD TV 42-80 Ultra Slim Fixed H600mm" ICA-PLB 860

Equip 23"-42" Slim TV Wall Mount Bracket

Equip 32"-55” Articulating TV Wall Mount Bracket

Neomounts LFD-W2000 TV mount wall 60-100" - tiltable

Neomounts LFD-W1500 TV mount wall 60-100" - fixed - landscape and portrait

TV Mounts & Stands Price Comparison