With the EW3864 Tower Power Strip it is possible to connect 8 electrical devices and 4 USB devices at the same time. The USB ports have a total capacity of 3A and feature overvoltage, overtemperature and Short circuit protections. You can place the Power Tower Block on your desk and the 4 non-slip rubber feet ensure that the power strip stays in place. It is possible to enable or disable all power sockets and USB ports at the same time with the on / off switch.

8 power sockets and 4 USB ports

The EW3864 tower power strip has 8 power sockets for connecting 8 electrical/electronic devices. The 2 normal USB type A ports (5V/3A) and above all 2 USB type C port (5V/3A) PD Fast Charger are suitable for charging the most modern and up-to-date tablets/smartphones and electronic devices (PD Quick Charge 3.0 – 20W).

Enable or disable all power outlets and USB ports with Illuminated On/Off switch.

Use the switch to enable or disable the entire power outlet at the same time. This is an excellent feature to save on the electricity bill and for security reasons. Use of standby power is prevented. It is safer to disable all electrical devices at the same time than to have all devices enabled at all times.

Space-saving design ideal for desktop

The EW3864 features a space-saving cubic tower design and takes up only limited desk space. All power sockets and USB ports are easily accessible. It is equipped with a 2.0m long cable. In addition, the Schuko 16A plug is equipped with a 90° angle which makes it ideal for being inserted into wall sockets present in tight and confined spaces!

Safe Device - Overload Protection Button

The USB ports and power outlets are equipped with overload, overvoltage, overtemperature and short circuit protection. All power outlets have child protection.

In the event that the plugs exceed the maximum rated power, the overload protection system will automatically turn off (it will emit a warning and turn off) and the power strip will stop working, protecting users and the devices connected to it.

The power strip is in fact equipped with a practical red button (overload button) located on the front of the device that can be pressed to reset/restore after the protection system has come into operation by turning off the power strip due to excessive power overload