Black Box LPS500A-MM-LC-R3, 1000 Mbit/s, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, Full, ...

Black Box LPS500A-MM-LC-R3 network media converter 1000 Mbit/s 850 nm Multi-mode

From £424.30
Offres:

Product Information

Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling.
LEDs indicate when it is feeding PoE power as well as when power is interrupted.
RoHS compliant. Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to multimode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit.

Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment.

It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate. Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable.

For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receive ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port.

Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link

Network Media Converters Black Box
Product
Name
Black Box LPS500A-MM-LC-R3 network media converter 1000 Mbit/s 850 nm Multi-mode
Network
Maximum data transfer rate
1000 Mbit/s
Networking standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Flow control support
Yes
Duplex system
Full
Weight & dimensions
Width
157 mm
Depth
41 mm
Height
13 mm
Weight
600 g
Ports & interfaces
Fiber optic connector
LC
Connectivity technology
Wired
Ethernet LAN (RJ-45) ports
1
Fiber ports quantity
1
Power
Power consumption (max)
65 W
Power over Ethernet (PoE)
Yes
Total Power over Ethernet (PoE) budget
30 W
Operational conditions
Operating temperature (T-T)
-20 - 70 °C
Operating relative humidity (H-H)
5 - 95%
Operating altitude
0 - 3000 m
Performance
Maximum transfer distance
550 m
Wavelength
850 nm
Fiber mode structure
Multi-mode
Logistics data
Harmonized System (HS) code
85176990
Features
Internal
No
LED indicators
Yes
Product colour
Black
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.

Customer Reviews

Share your opinion on the product or read reviews from other members.