Cuprinol Quick Drying Cladding & Fence Opaque , Paint, Fence, 10 L, Moor/Green, Water-based, Opaque

Cuprinol Quick Drying Cladding & Fence Opaque 10 L

Offres:

    Product Information

    Cuprinol Quick Drying Cladding & Fence Opaque . Product type: Paint, Best uses: Fence, Paint volume: 10 L. Package width: 286 mm, Package depth: 286 mm, Package height: 197 mm. Quantity per pack: 1 pc(s). Layers per pallet: 4 pc(s), Products per pallet layer: 12 pc(s), Products per pallet: 48 pc(s)

    House Paints Cuprinol
    Product
    Name
    Cuprinol Quick Drying Cladding & Fence Opaque 10 L
    Category
    Features
    Product type
    Paint
    Suitable for outdoor use
    Yes
    Suitable for indoor use
    No
    Best uses
    Fence
    Paint volume
    10 L
    Colour name
    Moor/Green
    Composition
    Water-based
    Opacity
    Opaque
    Surface coverage (min)
    6 m²/L
    Surface coverage (max)
    12 m²/L
    Volatile organic compounds (VOC) content
    13 g/l
    Volatile organic compounds (VOC) content labelling system
    Low (0.3 - 7.99%)
    Recoat after
    4 h
    Number of coats
    2
    Surface preparation
    To get the best results with Cuprinol Quick Drying Cladding & Fence Opaque Finish, make sure surfaces to be treated are sound, clean and dry (new surfaces particularly must be fully dry). Professional users: see Cuprinol Datasheet CT693 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting www.cuprinol.trade-decorating.co.uk
    How to use
    Application by brush and/or roller: stir thoroughly before and during use. Minimum two coats required. Application by spray: shake pack thoroughly before pouring contents into a Cuprinol sprayer. As with any sprayer it may take a couple of minutes to perfect your technique. Ensure you spray with the nozzle 15-30cm from the wood surface. Begin slowly and increase the pace as you get used to spraying. Take care not to spray too quickly as this may result in an uneven finish. Similarly, spraying too slowly will result in excess product being applied causing runs. Should this happen, simply brush into the wood. Avoid spraying surrounding plants, brickwork, glass, PVCu, etc. Overspray can be minimised by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. Cover any surfaces nearby to protect from overspray. Two coats of Cuprinol Quick Drying Cladding & Fence Opaque Finish will normally be required to produce a completely opaque finish. Allow the first coat to dry before applying the second. Cold, humid conditions will slow drying and may affect the final appearance and durability.
    How to store
    Do not use or store in extremes of temperature and protect from frost
    Disposal & recycling
    Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
    Tool cleaning
    Remove product from the brush with a cloth and then wash with water
    Packaging content
    Quantity per pack
    1 pc(s)
    Packaging data
    Package width
    286 mm
    Package depth
    286 mm
    Package height
    197 mm
    Package weight
    11.6 kg
    Logistics data
    Layers per pallet
    4 pc(s)
    Products per pallet layer
    12 pc(s)
    Products per pallet
    48 pc(s)
    NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.

    Customer Reviews

    Share your opinion on the product or read reviews from other members.