Cuprinol Wood Preserver Clear (BP) 1 L
From £12.42
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Cuprinol Wood Preserver Clear (BP) is a colourless general-purpose preserver for interior (occasionally wet or interior wood with risk of condensation) or exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi. This low odour formula has been specially developed with low aromatic solvents to make it more pleasant and convenient to use.
Product
Features
Suitable for indoor use
No
Suitable for outdoor use
Yes
Composition
Solvent-based
Best uses
Building, Decking, Fence, Furniture, Shed
Volume
1 L
Colour name
Clear
Opacity
Transparent
Surface coverage
5 m²/L
Number of coats (min)
2
Number of coats (max)
3
Minimum drying time
24 h
Maximum drying time
120 h
Drying time note
Dependent on the nature of the surface and the weather conditions.
Volatile organic compounds (VOC) content
760 g/l
Volatile organic compounds (VOC) content labelling system
Very high (>50%)
Surface preparation
Wood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood. Remove excessive dirt and soiling, large areas of algae, lichen, fungi or moss using an appropriate fungicidal wash or cleaner designed for the job. Ensure timber used in ground contact been pretreated or sold specially for this use.
How to use
Apply 2-3 uniform coats with a brush or dip for at least 3 minutes if practical. Apply the second coat after the first has soaked in. This product may take 1-5 days to dry fully under typical conditions. The application of this product may cause darkening of some timbers. If colour is critical try a test area to ensure acceptable appearance. To ensure thorough protection, treat all surfaces. Apply to any surfaces cut after treatment. After drying, glues, fillers, mastics and knotting can be used normally. Ensure wood is fully dry (allow 6-8 weeks), or use a vapour barrier such as heavy duty polythene (as used for damp proof membrane), before laying plastic floor coverings, rubber backed carpets or underlay, hanging vinyl wallpaper or using mastics. Do not spill on asphalt, bitumen, bitumen felt, tar, plaster, plastics, paint, etc. Where required, finishes (solvent-based or water-based paints, varnishes, woodstains and polishes, etc.) can be applied normally to treated wood after the preserver has dried (normally 1-5 days for brush or 3 minute dip, but may be longer in cold weather).
Tool cleaning
After use remove as much product as possible from equipment before cleaning .For best results use Polycell Brush Cleaner
How to store
Do not use or store in extremes of temperature
Disposal & recycling
Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
Packaging content
Quantity per pack
1 pc(s)
Packaging data
Package width
115 mm
Package depth
60 mm
Package height
203 mm
Package weight
970 g
Logistics data
Layers per pallet
5 pc(s)
Products per pallet layer
112 pc(s)
Products per pallet
560 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
