Kolink Void X Midi Tower Black

The Void X is the next case in the popular Void series from Kolink. The Void X has a striking front panel, with a pair of triangular ARGB infinity mirror panels, accented by a pair of ARGB LED strips, which results in an aesthetically pleasing case. The Void X has impressive hardware support too, including dual radiator support, vertical GPU support, E-ATX Motherboard support and much more!

Kolink Void X: Combining aesthetics & cooling options

The Kolink Void X ARGB comes with a 120mm ARGB PWM fan installed at the rear. The ARGB infinity mirrors and front ARGB LED strips, plus the rear fan, can be controlled via connection to your motherboards 3-Pin 5VDG connector using the applicable motherboard software, or via the reset/RGB switch on the I/O panel. Alongside the pre-installed fan, there is space to install 3 x 120mm or 2 x 140mm fans at the front & 2 x 120mm/140mm fans on the roof. Users are also free to install up to a 360mm radiator in the front, plus a 240mm radiator in the roof.

A full tempered glass side panel shows off your system build in style, with ventilation on both sides of the front panel.

The Kolink Void X ARGB: Hardware orientated

The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray and PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for a full sized ATX PSU.

Graphics cards can be up to 36cm long and CPU coolers up to 17.5cm tall. Additionally, the I/O panel located at the front possesses a pair of USB3.0 Type-A ports as well as two USB2.0 ports, HD-Audio, Mic & a reset/RGB button.