Vision HDMI-over-IP Receiver, 1920 x 1200 pixels, AV receiver, Wired, Black, HDCP

Vision HDMI-over-IP Receiver AV receiver Black

Offres:

    Product Information

    The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.

    Beware of cheap alternatives that flood your network!

    USB Over Network
    It can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard, mice, but not applications that demand high bandwidth like interactive displays.

    Scalable
    Transmitters and receivers sold separately so you can scale your system.

    Advanced EDID Copy
    A reset button restores EDID to default, or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.

    One to Many
    Need to display one source on many screens? This product multi-casts, so you can have one transmitter for the source, and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.

    Point to Point without LAN
    Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.

    Maximum Length
    When using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.

    HD
    Fully HDCP 1.4 compliant, it supports resolutions up to 1920 x 1200 @ 60 Hz.

    Audio
    Digital audio which is encoded on the HDMI signal is transmitted.

    IR Pass-Through
    Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60 kHz IR signals.

    Plug and Play
    EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.

    H.265 Compression
    Video is compressed using the H.265 protocol. Images are full colour with smooth motion.

    LAN Protocols
    Despite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.

    Dual-Power
    This product requires a power supply for each transmitter and receiver. It does not use PoE.

    Unmanaged Switch
    Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.

    Multiple Sources
    If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.

    Auto Standby
    If the input is shut off the display will be allowed to go to sleep.

    Not Backward Compatible
    This version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset.

    AV Extenders Vision
    Product
    Name
    Vision HDMI-over-IP Receiver AV receiver Black
    Category
    Brand
    Ports & interfaces
    Connectivity technology
    Wired
    RJ-45 input ports
    1
    HDMI in
    1
    HDMI version
    1.3
    USB ports quantity
    2
    USB connector type
    USB Type-A
    Remote (IR) input
    1
    Weight & dimensions
    Width
    92 mm
    Depth
    67 mm
    Height
    168 mm
    Weight
    150 g
    Receiver dimensions (WxDxH)
    92 x 67 x 168 mm
    Receiver weight
    150 g
    Packaging data
    Quantity per pack
    1 pc(s)
    Package width
    150 mm
    Package depth
    135 mm
    Package height
    70 mm
    Package weight
    1.26 kg
    Operational conditions
    Operating temperature (T-T)
    10 - 50 °C
    Operating relative humidity (H-H)
    20 - 90%
    Features
    Type
    AV receiver
    Maximum resolution
    1920 x 1200 pixels
    Cable types supported
    Cat5e, Cat6
    Maximum refresh rate
    60 Hz
    IR pass-through
    Yes
    Bandwidth
    6.75 Gbit/s
    Cable length
    1.5 m
    Video compression formats
    H.265
    HDCP
    Yes
    Material
    Metal
    HDCP version
    1.4
    Product colour
    Black
    NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.

    Customer Reviews

    Share your opinion on the product or read reviews from other members.