Armstead Trade Smooth Masonry Paint , Emulsion, Ready mixed, Masonry, Smooth finish, 5 L, Magnolia

Armstead Trade Smooth Masonry Paint 5 L

Offres:
    No offers available at the moment

    Product Information

    Armstead Trade Smooth Masonry Paint . Product type: Emulsion, Product form: Ready mixed, Best uses: Masonry. Package width: 181 mm, Package depth: 184 mm, Package height: 232 mm. Quantity per pack: 1 pc(s). Layers per pallet: 4 pc(s), Products per pallet layer: 30 pc(s), Products per pallet: 120 pc(s)

    House Paints Armstead Trade
    Product
    Name
    Armstead Trade Smooth Masonry Paint 5 L
    Category
    House Paints
    Brand
    Armstead Trade
    Features
    Product type
    Emulsion
    Product form
    Ready mixed
    Suitable for outdoor use
    Yes
    Suitable for indoor use
    No
    Best uses
    Masonry
    Finish type
    Smooth finish
    Paint volume
    5 L
    Colour name
    Magnolia
    Surface coverage
    12 m²/L
    Composition
    Water-based
    Surface coverage (min)
    6 m²/L
    Surface coverage (max)
    12 m²/L
    Volatile organic compounds (VOC) content
    1 g/l
    Volatile organic compounds (VOC) content labelling system
    Minimal (0 - 0.29%)
    Minimum drying time
    1 h
    Maximum drying time
    2 h
    Drying time note
    Dependent on temperature and humidity
    Recoat after (min)
    2 h
    Recoat after (max)
    4 h
    Number of coats (min)
    1
    Number of coats (max)
    2
    Protection term
    10 year(s)
    Surface preparation
    To get the best results with Armstead Trade Smooth Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Armstead Trade Datasheet AM302 for full information before use, available free on request by telephoning 0333 222 7070 or visiting armsteadtrade.co.uk. Before surface preparation, read the adjacent information about old lead paints.
    How to use
    STIR THOROUGHLY BEFORE USE. On very absorbent surfaces a sealing coat of thinned Armstead Trade Smooth Masonry (up to 1 part clean water to 5 parts paint) should be applied. The normal finishing process is 1 or 2 full coats of Armstead Trade Smooth Masonry. Touch Dry: 1-2 hours. Recoat: 2-4 hours. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 12m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area.
    Dilution note
    Sealing new/bare surfaces: Add up to 1 part clean water to 5 parts paint. Normal use (not to be exceeded): Add up to 1 part clean water to 10 parts paint. Conventional spray application: Add up to 1 part clean water to 2.5 parts paint. Airless spray application: Add up to 1 part clean water to 5 parts paint. Conventional spray : Satisfactory through most equipment.
    How to store
    Do not use or store in extremes of temperature.
    Disposal & recycling
    When this paint container is empty please ask your stockist about recycling. If you have leftover paint, please dispose of it responsibly and consider donating it to Community RePaint. Find out more at armsteadtrade.co.uk/pp
    Tool cleaning
    After use, remove as much paint as possible from equipment before cleaning with water.
    Packaging content
    Quantity per pack
    1 pc(s)
    Packaging data
    Package width
    181 mm
    Package depth
    184 mm
    Package height
    232 mm
    Package weight
    7.09 kg
    Logistics data
    Layers per pallet
    4 pc(s)
    Products per pallet layer
    30 pc(s)
    Products per pallet
    120 pc(s)
    NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.

    Customer Reviews

    Share your opinion on the product or read reviews from other members.