Polycell Textured Ceilings Rippled Effect Matt 2.5 L
From £27
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Polycell Textured Ceilings Rippled Effect Matt. Finish type: Matt, Volume: 2.5 L, Surface coverage (min): 4.8 m²/L. Layers per pallet: 6 pc(s), Products per pallet layer: 30 pc(s), Products per pallet: 180 pc(s). Quantity per pack: 1 pc(s), Package width: 200 mm, Package depth: 200 mm
Product
Features
Suitable for indoor use
Yes
Suitable for outdoor use
No
Finish type
Matt
Volume
2.5 L
Surface coverage (min)
4.8 m²/L
Surface coverage (max)
6.8 m²/L
Number of coats (min)
1
Number of coats (max)
2
Recoat after note
Overnight
Minimum drying time
2 h
Maximum drying time
4 h
Drying time note
Depending on conditions
Volatile organic compounds (VOC) content
1 g/l
Volatile organic compounds (VOC) content labelling system
Minimal (0 - 0.29%)
Surface preparation
Cover furniture and carpets. Make sure the ceiling is clean, dry and free from loose particles and mould. Fill any holes and cracks larger than hairline with an appropriate Polycell Polyfilla and sand down well. Seal new, bare and porous surfaces with Polycell Problem Wall Primer.
How to use
1) Stir the product well and transfer to a roller tray for easier roller loading. You'll get the best result if you use a foam roller for maximum texture or medium pile roller for a finer texture. 2) Apply a thick even coat to the ceiling using short criss-cross strokes, until you have covered about 1m². Finish this area by rolling lightly in one direction. Continue across the ceiling 1m² at a time. To finish off, touch in corners, edges and around light fittings with a small brush, stippling to match the texture. 3) A second coat may be applied once the first coat is fully dry (overnight).
Tool cleaning
Remove excess paint from tools before cleaning with warm water
How to store
Do not use or store in extremes of temperature and protect from frost
Packaging data
Quantity per pack
1 pc(s)
Package width
200 mm
Package depth
200 mm
Package height
140 mm
Logistics data
Layers per pallet
6 pc(s)
Products per pallet layer
30 pc(s)
Products per pallet
180 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
