Intel SSDSC2KB480G801, 480 GB, 2.5", 560 MB/s, 6 Gbit/s

Intel SSDSC2KB480G801 internal solid state drive 480 GB 2.5" Serial ATA III TLC 3D NAND

Offres:
    No offers available at the moment

    Product Information

    Enhanced Power Loss Data Protection

    Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.

    Hardware Encryption

    Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.

    Temperature Monitoring and Logging

    Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.

    End-to-End Data Protection

    End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.

    Internal Solid State Drives Intel
    Product
    Name
    Intel SSDSC2KB480G801 internal solid state drive 480 GB 2.5" Serial ATA III TLC 3D NAND
    Category
    Internal Solid State Drives
    Brand
    Intel
    Operational conditions
    Operating temperature (T-T)
    0 - 70 °C
    Minimum operating temperature
    0 °C
    Maximum operating temperature
    70 °C
    Operating vibration
    2.17 G
    Non-operating vibration
    3.13 G
    Operating shock
    1000 G
    Non-operating shock
    1000 G
    Operating / non-operating shock
    1000 G/0.5 msec
    Power
    Power consumption (idle)
    1 W
    Other features
    Product colour
    Silver
    Processor family
    Intel SSD D3
    Drive capacity
    480 GB
    Launch date
    Q3'18
    SSD endurance rating
    1.2 PBW
    SSD hardware encryption
    AES 256 bit
    SSD power consumption (active)
    3.0W
    SSD power consumption (idle)
    1.0W
    SSD shock
    1000 G/0.5 msec
    Sequential reading
    560 MB/s
    Sequential writing speed
    490 MB/s
    Status
    Launched
    Last change
    63903513
    Intel Rapid Start Technology version
    0.00
    Remote Secure Erase (RSE) technology version
    0.00
    Product family
    Data center SSD
    Product series
    Intel® SSD D3-S4510 Series
    Product codename
    Youngsville Refresh
    Logistics data
    Export Control Classification Number (ECCN)
    5A992C
    Commodity Classification Automated Tracking System (CCATS)
    G162706
    Harmonized System (HS) code
    84717070
    Brand-specific features
    Intel High Endurance Technology (HET)
    No
    Intel® Rapid Start Technology
    No
    Intel® Remote Secure Erase
    No
    Intel® Smart Response Technology
    No
    Intel Smart Response Technology version
    0.00
    Features
    SSD capacity
    480 GB
    SSD form factor
    2.5"
    Interface
    Serial ATA III
    NVMe
    No
    Memory type
    TLC 3D NAND
    Component for
    Server/workstation
    Hardware encryption
    Yes
    NAND flash type
    TLC (Triple Level Cell)
    Security algorithms
    256-bit AES
    Data transfer rate
    6 Gbit/s
    Read speed
    560 MB/s
    Write speed
    490 MB/s
    Random read (100% span)
    95000 IOPS
    Random write (100% span)
    18000 IOPS
    Read latency
    36 µs
    Write latency
    37 µs
    End-to-End Data Protection
    Yes
    Enhanced Power Loss Data Protection technology
    Yes
    SSD temperature monitoring
    Yes
    Uncorrectable Bit Error Rate (UBER)
    < 1 per 10^17 bits read
    Mean time between failures (MTBF)
    2000000 h
    Market segment
    Server
    SSD ARK ID
    134920
    Temperature monitoring and logging
    Yes
    NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.

    Customer Reviews

    Share your opinion on the product or read reviews from other members.