Cuprinol Garden Shades Tinting Base , Paint, Base, Building, Fence, Furniture, Shed, Matt, 2.5 L, Medium Base

Cuprinol Garden Shades Tinting Base 2.5 L

From £19.74
Offres:

Product Information

Add beautiful colours to your garden with Cuprinol Garden Shades, which has been specially developed to colour, protect and weatherproof sheds, fences, garden furniture and other garden wood for upto 6 years. Its special pigments ensure a richer colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta,brick and stone. Colours are easy to choose by combining nature's neutrals (greys, and muted greens, browns and blues) which are best suited for bigger items in the garden and nature's brights (yellows, pinks, purples and brigther greens and blues) ideal for smaller items in the garden. Just have a go!
Not to be applied on decking.

House Paints Cuprinol
Product
Name
Cuprinol Garden Shades Tinting Base 2.5 L
Category
Features
Product type
Paint
Product form
Base
Suitable for outdoor use
Yes
Suitable for indoor use
No
Best uses
Building, Fence, Furniture, Shed
Finish type
Matt
Paint volume
2.5 L
Colour name
Medium Base
Surface coverage
10 m²/L
Composition
Water-based
Opacity
Opaque
Surface coverage (min)
2 m²/L
Surface coverage (max)
12 m²/L
Volatile organic compounds (VOC) content
15 g/l
Volatile organic compounds (VOC) content labelling system
Low (0.3 - 7.99%)
Drying time
1 h
Drying time note
Touch dry in 1 hour under dry weather conditions. On areas subject to wear such as garden furniture allow a few days before heavy use or contact with soft furnishings. Believed to be safe, once dry, for use on wood which pets, wild animals and birds come into contact or gnaw.
Number of coats
2
Surface preparation
All surfaces should be clean and dry. If it has been painted previously coated, loose flaking wood should be stripped back to bare wood. Test a small area first for colour and adhesion.The final colour will vary depending on the surface and the number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent decay.
How to use
Apply only in dry conditions, above 5 degrees Celsius and when bad weather is not forecast. Application by brush: Stir thoroughly before and during use. Brush on product evenly along the grain. Minimum 2 coats required.Application by spray: Stir thoroughly before pouring contents into a Cuprinol sprayer. Refer to the Sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.
How to store
Do not store or use in extreme temperatures and protect from frost
Disposal & recycling
Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
Tool cleaning
Remove product from brush with a cloth and then wash with water.
Packaging content
Quantity per pack
1 pc(s)
Packaging data
Package width
157 mm
Package depth
157 mm
Package height
157 mm
Package weight
3.02 kg
Logistics data
Layers per pallet
6 pc(s)
Products per pallet layer
42 pc(s)
Products per pallet
252 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.

Customer Reviews

Share your opinion on the product or read reviews from other members.