Cuprinol Exterior Wood Preserver (BP) 5 L
From £35.06
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Cuprinol Exterior Wood Preserver (BP) is an exterior lightly pigmented wood preservative for rough sawn and smooth garden timbers, such as cladding, fencing, sheds, greenhouses and summerhouses. It contains active ingredients that penetrate into the timber to prevent rot, decay and blue stain. It is a water-based product that can be used near plants.
Product
Features
Suitable for indoor use
No
Suitable for outdoor use
Yes
Composition
Water-based
Best uses
Wood
Volume
5 L
Colour name
Golden Brown
Opacity
Transparent
Surface coverage
6 m²/L
Number of coats (min)
2
Number of coats (max)
3
Minimum drying time
2 h
Maximum drying time
6 h
Drying time note
Dependent on the nature of the surface and the weather conditions
Recoat after
48 h
Recoat after (min)
72 h
Recoat after (max)
72 h
Volatile organic compounds (VOC) content
67 g/l
Volatile organic compounds (VOC) content labelling system
Low (0.3 - 7.99%)
Surface preparation
Cuprinol Exterior Wood Presever (BP) can be used on all types of wood, wood that has been previously pressure treated, or wood that has been previously treated with a wood preservative (provided it has been allowed to weather). Ensure that timber used in ground contact has been pre-treated specially for such use. Ensure surfaces to be treated are sound, clean, dry, free from any surface coatings, mould or algae. Before applying this product to fencing, sheds, etc., ensure ground is protected by laying down a protective barrier such as a plastic sheet. Professional users: see Cuprinol Datasheet CT702 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting www.cuprinol.trade-decorating.co.uk
How to use
Apply 2-3 uniform coats to achieve a total coverage range of between 5 and 6.2 m2/l. Allow the previous coat to soak in before applying the next, usually 2-6 hours under normal weather conditions. This product is wax enriched to repel water. Recoat within 2-3 days of previous coat. Note that the colour in the can may be different to the final shade when dry. The product becomes effective against blue staining and wood rotting fungi when the required amount has been applied and allowed to dry. Do not apply in temperatures below 5°C, in damp conditions or if rain is likely before the product has dried. Apply evenly, avoiding splashing of surrounding plants, brickwork, glass, PVCu, etc. Any splashing should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. TIP: where a strong colour change is involved, more coats may be required. If using more than 1 pack it is advisable to mix them together in a larger container or finish in a corner before starting a new pack.
Tool cleaning
Remove product from the brush with a cloth and then wash with water
How to store
Do not use or store in extremes of temperature
Disposal & recycling
Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
Packaging content
Quantity per pack
1 pc(s)
Packaging data
Package width
178 mm
Package depth
110 mm
Package height
305 mm
Package weight
5.45 kg
Logistics data
Layers per pallet
3 pc(s)
Products per pallet layer
50 pc(s)
Products per pallet
150 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
