Polycell Polyfilla SmoothOver for Damaged and Textured Walls 2.5 L
From £39.46
Offres:
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Similar Products
Product Information
Polycell Polyfilla SmoothOver for Damaged and Textured Walls . Volume: 2.5 L, Surface coverage: 2 m²/L, Recoat after: 24 h. Layers per pallet: 6 pc(s), Products per pallet layer: 32 pc(s), Products per pallet: 192 pc(s). Quantity per pack: 1 pc(s), Package width: 260 mm, Package depth: 150 mm
Product
Features
Suitable for indoor use
Yes
Suitable for outdoor use
No
Volume
2.5 L
Surface coverage
2 m²/L
Number of coats (min)
1
Number of coats (max)
2
Recoat after
24 h
Drying time
24 h
Drying time note
Depending on conditions
Volatile organic compounds (VOC) content
1 g/l
Volatile organic compounds (VOC) content labelling system
Minimal (0 - 0.29%)
Surface preparation
Cover furniture and carpets. Make sure the surface is clean, dry and free from loose particles and mould. Fill any holes deeper than 4mm with an appropriate Polycell Polyfilla and sand down well. Seal stains with Polycell Stain Stop. Touch in nails or screws with a suitable metal primer to avoid corrosion. Scrape off any high peaks from the textured surface with a pallet knife.
How to use
1) Stir the product well to a creamy consistency. 2) Immerse the SmoothOver Roller fully into the Polyfilla SmoothOver so that the roller is covered in product. 3) Gently roll the product out onto the wall, covering an area of about 1m². Smooth off using the SmoothOver Wiper in an arc over the surface of the product, ensuring that all texture is fully covered. 4) Continue across the wall 1m² at a time, overlapping each section to ensure an even coverage. Allow to dry. 5) Apply a second coat if needed. When surface is fully dry, lightly sand down small irregularities and tramlines for a perfectly smooth finish. 6) Your walls are now ready to decorate, don't worry if your background colour shows through, this will be covered when you decorate.
Tool cleaning
Remove excess product from tools before washing with warm water
How to store
Do not use or store in extremes of temperature and protect from frost
Packaging data
Quantity per pack
1 pc(s)
Package width
260 mm
Package depth
150 mm
Package height
140 mm
Logistics data
Layers per pallet
6 pc(s)
Products per pallet layer
32 pc(s)
Products per pallet
192 pc(s)
NOTE: The above information is provided for your convenience only, and we cannot guarantee its accuracy with the seller.
Customer Reviews
Share your opinion on the product or read reviews from other members.
