NRGkick 20001004 vehicle battery charger accessory

NRGkick smart attachment 16A 3pole

Smart attachment type 16A 3pole for the NRGkick charging unit – for connection to single phase 16A sockets (max. 16A/3.7kW). This NRGkick smart attachment allows you to use the normally permanently connected NRGkick KfW charging unit with the above-mentioned sockets.

Consisting of connector unit and smart attachments

All smart attachments measure the temperature on each individual phase pin – in the case of the smart attachment type E+F “Schuko” even on both pins! Other charging units do not measure the temperature at all or only at Schuko adapters. With NRGkick KfW Select and the smart attachments, on the other hand, you are on the safe side: Your NRGkick knows exactly whether too much heat is being generated due to an incorrectly installed socket and avoids dangerous situations before they arise. If your socket gets too hot, NRGkick regulates the charging current completely independently to ensure safe operation without danger.

Prevention of arcing through automatic puller detection

The connector system reliably prevents arcing. It is the only charging unit on the market that interrupts the current flow even before the contacts leave each other!

High-quality design

All contact elements of the connector unit and the smart attachments have been provided with a silver coating. This ensures the best contact properties even after years and many thousands of mating cycles!

Automatic attachment recognition

The smart attachment used is intelligent and not only transmits temperature values or a country-specific charging current limit to the NRGkick, for example – it is of course also identified by the NRGkick charging unit. This ensures that, for example, when using an NRGkick smart attachment 16A, it can only be charged with a maximum of 16A.