Skip to content
Magic Prices: Price Comparison
Best Deals

Perle PSI-MOS-RS422/FO1300 E network media converter 2 Mbit/s 1300 nm Multi-mode Green, Black

Perle PSI-MOS-RS422/FO1300 E, 2 Mbit/s, Full, 27000 m, 1300 nm, Multi-mode, Green, Black

Best offerPrice trend

£1,724

-0%
Price trend
Detailed analysis ›
Price history of Perle PSI-MOS-RS422/FO1300 E network media converter 2 Mbit/s 1300 nm Multi-mode Green, Black over the last 3 months
DatePrice
30 October 2026£1,726
31 October 2026£1,726
31 October 2026£1,726
1 November 2026£1,726
2 November 2026£1,727
5 November 2026£1,722
7 November 2026£1,723
7 November 2026£1,723
10 November 2026£1,723
10 November 2026£1,723
12 November 2026£1,722
13 November 2026£1,722
13 November 2026£1,722
13 November 2026£1,722
15 November 2026£1,724

Compare Perle PSI-MOS-RS422/FO1300 E network media converter 2 Mbit/s 1300 nm Multi-mode Green, Black prices UK

Product Information

PSI-MOS-RS422/FO 1300 E Serial to Fiber Converter

Connect RS422 and RS485 devices to fiber optic cable
The PSI-MOS-RS422/FO 1300 E Serial to Fiber Converter transparently connects 4-wire RS422/RS485 and INTERBUS devices to fiber optic cable. By transmitting serial data over optical fiber, these serial media converters provide an economical path to extend the reach of RS422 and RS485 devices.

Long Distance Serial Data Transmission over Fiber

Using the FO 1300 E Serial to Fiber Converter you can extend your serial data transmission up to 27km (16.7 miles) over multimode fiber or 45km (28 miles) over single mode fiber. The result is that any two pieces of asynchronous serial equipment, located miles apart, can communicate at full duplex over fiber optic cable at rates up to 2 Mbps.

EMI, RFI and Transient Surge Immunity

Another advantage of the FO 1300 E fiber optic transmission system is the electrically isolated connection of devices. Electromagnetic interference (EMI) is a common phenomenon in typical environments like industrial plants, warehouses and factory floors. This interference can cause corruption of data over RS422 or copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise, thus preventing the negative effects of voltage equalization currents and electromagnetic interference on the data cables. A Serial to Fiber Media Converter therefore enables you to inter-connect your serial devices over fiber ensuring optimal data transmission, increased availability of the system, and improved network design flexibility for point-to-point connections and star structures.

Flexible Fiber Optic Connections

The FO 1300 E operates at 1300 nm wavelength, using a separate LED emitter and photo-detector on SC type connectors. Almost any multimode or single mode glass fiber size can be used.

Power Budget Considerations

Calculating the power budget is critically important with planning the fiber optic link. The optical power budget is the amount of light required to transmit data successfully over distance through a fiber-optic connection. The amount of light energy available within the setup will dictate the length of the fiber optic cable run between serial media converters within the network. Optical power budgets are critical to help businesses avoid signal distortion. To learn how to calculate optical power budget read our technical note. Transmit and receive dBm can be found in the Hardware specifications.

Transmit each serial signal out over 10 fiber optic lines

Up to ten (10) Serial to Fiber Converters can be grouped together using the TBUS DIN Rail bus system for voltage and data. This allows the serial converter to operate as a star coupler, taking the serial data input signal and distributing it to all Fiber optic output ports.

High Quality Features and Support

The FO 1300 E are also equipped with comprehensive diagnostic functions to increase system availability, simplify start-up and permanently monitor the optical transmission quality. The integrated optical diagnostics allow permanent monitoring of the FO paths during installation and operation. The floating switch contact is activated when the signal level on the fiber optic paths reaches a critical level. This early alarm generation enables critical system states to be detected before they result in failure. These cost and time saving features, along with free worldwide technical support, make the FO 1300 E serial to fiber converter the smart choice for IT professionals.
Supply voltage routed through via DIN rail connectors
Connections can be plugged in using a COMBICON screw terminal block
Redundant power supply possible by means of optional system power supply unit
High-quality electrical isolation between all interfaces (INTERBUS, fiber optic ports, power supply, DIN rail connector)
Approved for use in zone 2
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Automatic data rate detection for all data rates up to 2 Mbps

Network Media Converters Perle

Product

Name
Perle PSI-MOS-RS422/FO1300 E network media converter 2 Mbit/s 1300 nm Multi-mode Green, Black
Brand
Perle

Network

Maximum data transfer rate
2 Mbit/s
Duplex system
Full

Weight & dimensions

Width
35 mm
Depth
105 mm
Height
105 mm
Weight
190.6 g

Ports & interfaces

Fiber optic connector
SC
Connectivity technology
Wired

Power

Input voltage
24 V
Input current
0.1 A

Operational conditions

Operating temperature (T-T)
-20 - 60 °C
Storage temperature (T-T)
-40 - 85 °C
Operating relative humidity (H-H)
0 - 95%
Operating altitude
0 - 5000 m

Performance

Maximum transfer distance
27000 m
Wavelength
1300 nm
Fiber mode structure
Multi-mode

Certificates

Compliance certificates
CE, UL
Certification
EN 61000-6-2:2005

Features

Product colour
Green, Black
International Protection (IP) code
IP20

Customer Reviews

Share your opinion on the product or read reviews from other members.