wolfcraft GmbH VLC 800 Black 46.5 cm

The VLC 800 vinyl and laminate cutter is a versatile and powerful tool for all tradespeople and DIYers who frequently undertake extensive laminate and vinyl laying jobs. This all-rounder not only cuts all standard laminate boards up to 11 mm thick and 465 mm wide, but also the extremely popular floor boards made from exceptionally durable vinyl. It is suitable for all commercially available vinyl boards from 2 to maximum 11 mm thick. The VLC 800 easily cuts through boards made from 100% vinyl or those with a HDF base layer with footfall sound insulation. Simply narrow the cutting gap using the adjustable cutting bars to cut thin vinyl material of approx. 2 – 5 mm. Even self-adhesive vinyl can be processed with ease thanks to the specially coated blade. With minimal noise and dust and no need for power. The high-quality, laser-cut, smooth blade not only makes cutting laminate safer, but also guarantees you a precise, clean cutting edge. This is primarily due to the blade geometry that sets the angle between the blade and cutting gap to the most efficient ratio. The VLC 800 also features a holding down clamp on the cutting lever that presses the board securely against the integrated serrated cutter bars and prevents the board slipping or jamming on the blade. This is very helpful, especially with free angular cuts from 0° to 180° without a stop or with continuous longitudinal cuts. On the side of the aluminium profile, there is a stop for cutting strips of vinyl to a width of 55 mm for insertion into special skirting boards. This provides a quick way of producing baseboards to match the floor covering.