Polycell Textured Ceilings Rippled Effect Matt 2.5 L
Polycell Textured Ceilings Rippled Effect Matt, Matt, 2.5 L, 4.8 m²/L, 6.8 m²/L, Overnight, 2 h
Compare Polycell Textured Ceilings Rippled Effect Matt 2.5 L prices UK
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Product Information
Polycell Textured Ceilings Rippled Effect Matt. Finish type: Matt, Volume: 2.5 L, Surface coverage (min): 4.8 m²/L. Layers per pallet: 6 pc(s), Products per pallet layer: 30 pc(s), Products per pallet: 180 pc(s). Quantity per pack: 1 pc(s), Package width: 200 mm, Package depth: 200 mm
Features
- Suitable for indoor use
- Yes
- Suitable for outdoor use
- No
- Finish type
- Matt
- Volume
- 2.5 L
- Surface coverage (min)
- 4.8 m²/L
- Surface coverage (max)
- 6.8 m²/L
- Number of coats (min)
- 1
- Number of coats (max)
- 2
- Recoat after note
- Overnight
- Minimum drying time
- 2 h
- Maximum drying time
- 4 h
- Drying time note
- Depending on conditions
- Volatile organic compounds (VOC) content
- 1 g/l
- Volatile organic compounds (VOC) content labelling system
- Minimal (0 - 0.29%)
- Surface preparation
- Cover furniture and carpets. Make sure the ceiling is clean, dry and free from loose particles and mould. Fill any holes and cracks larger than hairline with an appropriate Polycell Polyfilla and sand down well. Seal new, bare and porous surfaces with Polycell Problem Wall Primer.
- How to use
- 1) Stir the product well and transfer to a roller tray for easier roller loading. You'll get the best result if you use a foam roller for maximum texture or medium pile roller for a finer texture. 2) Apply a thick even coat to the ceiling using short criss-cross strokes, until you have covered about 1m². Finish this area by rolling lightly in one direction. Continue across the ceiling 1m² at a time. To finish off, touch in corners, edges and around light fittings with a small brush, stippling to match the texture. 3) A second coat may be applied once the first coat is fully dry (overnight).
- Tool cleaning
- Remove excess paint from tools before cleaning with warm water
- How to store
- Do not use or store in extremes of temperature and protect from frost
Packaging data
- Quantity per pack
- 1 pc(s)
- Package width
- 200 mm
- Package depth
- 200 mm
- Package height
- 140 mm
Logistics data
- Layers per pallet
- 6 pc(s)
- Products per pallet layer
- 30 pc(s)
- Products per pallet
- 180 pc(s)
Customer Reviews
Share your opinion on the product or read reviews from other members.
