Hammerite Radiator Enamel Gloss Aerosol 0.4 L
Hammerite Radiator Enamel Gloss Aerosol , Paint, Metal, Gloss, 0.4 L, White, Bathroom, Bedroom, Children's room, Dining...Read full description ↓
Compare Hammerite Radiator Enamel Gloss Aerosol 0.4 L prices UK
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Product Information
Hammerite Radiator Enamel Gloss Aerosol . Product type: Paint, Best uses: Metal, Finish type: Gloss. Package width: 64 mm, Package depth: 64 mm, Package height: 199 mm. Quantity per pack: 1 pc(s). Suitable for materials: Metal. Master (outer) case width: 200 mm, Master (outer) case length: 136 mm, Master (outer) case height: 200 mm
Product
- Name
- Hammerite Radiator Enamel Gloss Aerosol 0.4 L
- Category
- House Paints
- Brand
- Hammerite
Features
- Product type
- Paint
- Suitable for outdoor use
- No
- Suitable for indoor use
- Yes
- Best uses
- Metal
- Finish type
- Gloss
- Paint volume
- 0.4 L
- Colour name
- White
- Suitable location
- Bathroom, Bedroom, Children's room, Dining room, Hallway, Home office, Kitchen, Living room
- Surface coverage
- 0.5 m²/L
- Composition
- Solvent-based
- Volatile organic compounds (VOC) content
- 499 g/l
- Volatile organic compounds (VOC) content labelling system
- High (25 - 50%)
- Minimum drying time
- 1 h
- Maximum drying time
- 2 h
- Recoat after
- 0.25 h
- Number of coats (min)
- 3
- Number of coats (max)
- 4
- Dispenser type
- Spray
- Surface preparation
- All surfaces must be clean, dry and free from rust, flaking paint, dirt, dust and grease. Rub down all painted surfaces with abrasive paper. Radiators must be turned off and only painted when cold. Mask off the surrounding area to protect from overspray
- How to use
- Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving. Do not concentrate spray on one spot. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray as sagging may occur if excessive paint is applied. Between coats invert can and spray for 2 seconds to avoid blockages.
- HSE note
- Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol. Pressurized container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains phthalic anhydride and 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
Packaging content
- Quantity per pack
- 1 pc(s)
Packaging data
- Package width
- 64 mm
- Package depth
- 64 mm
- Package height
- 199 mm
- Package weight
- 400 g
Logistics data
- Master (outer) case width
- 200 mm
- Master (outer) case length
- 136 mm
- Master (outer) case height
- 200 mm
- Products per master (outer) case
- 6 pc(s)
- Layers per pallet
- 4 pc(s)
- Products per pallet layer
- 222 pc(s)
- Products per pallet
- 888 pc(s)
Other features
- Suitable for materials
- Metal
Customer Reviews
Share your opinion on the product or read reviews from other members.
