Hammerite Direct To Rust Metal Paint Aerosol Satin Finish 0.4 L
Hammerite Direct To Rust Metal Paint Aerosol Satin Finish , (2-in-1) Paint & primer, Fence, Furniture, Satin, 0.4 L,...Read full description ↓
Compare Hammerite Direct To Rust Metal Paint Aerosol Satin Finish 0.4 L prices UK
*Date of last price update
User Notice: We regularly reference new offers to provide you with the widest selection. However, the displayed results do not reflect all available offers on the market. By default, offers are sorted by price, with the lowest price appearing first.
Product Information
Hammerite Direct To Rust Metal Paint Aerosol Satin Finish . Product type: (2-in-1) Paint & primer, Best uses: Fence, Furniture, Finish type: Satin. Package width: 64 mm, Package depth: 64 mm, Package height: 199 mm. Quantity per pack: 1 pc(s). Suitable for materials: Metal. Master (outer) case width: 200 mm, Master (outer) case length: 136 mm, Master (outer) case height: 200 mm
Product
- Name
- Hammerite Direct To Rust Metal Paint Aerosol Satin Finish 0.4 L
- Category
- House Paints
- Brand
- Hammerite
Features
- Product type
- (2-in-1) Paint & primer
- Suitable for outdoor use
- Yes
- Suitable for indoor use
- No
- Best uses
- Fence, Furniture
- Finish type
- Satin
- Paint volume
- 0.4 L
- Colour name
- Black
- Composition
- Solvent-based
- Volatile organic compounds (VOC) content
- 399 g/l
- Volatile organic compounds (VOC) content labelling system
- Very high (>50%)
- Coverage per pack
- 0.5 m²
- Minimum drying time
- 1 h
- Maximum drying time
- 2 h
- Recoat after
- 0.25 h
- Number of coats (min)
- 3
- Number of coats (max)
- 4
- Rust protection
- Yes
- Dispenser type
- Spray
- Protection term
- 8 year(s)
- Surface preparation
- Abrade smooth surfaces and remove all loose and flaking paint with a wire brush. Remove dirt and dust with diluted detergent. Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry. Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.If there is a reaction remove all paint from the surface. On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint
- How to use
- Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes.Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages.
- HSE note
- Flame, Exclamation mark Danger Contains HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS,less than 5% N-HEXANEExtremely flammable aerosol. Causes skin irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Pressurized container: may burst if heated.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 2-butanone oxime. May produce an allergic reaction.
Packaging content
- Quantity per pack
- 1 pc(s)
Packaging data
- Package width
- 64 mm
- Package depth
- 64 mm
- Package height
- 199 mm
- Package weight
- 470 g
Logistics data
- Master (outer) case width
- 200 mm
- Master (outer) case length
- 136 mm
- Master (outer) case height
- 200 mm
- Products per master (outer) case
- 6 pc(s)
- Layers per pallet
- 4 pc(s)
- Products per pallet layer
- 222 pc(s)
- Products per pallet
- 888 pc(s)
Other features
- Suitable for materials
- Metal
Customer Reviews
Share your opinion on the product or read reviews from other members.
